You have no items in your shopping cart.
The MoveOver12 Dual Carbon Rail Slider Kit from Benro features all the components you need to capture cinematic linear movement to your productions. The kit features the MoveOver12 35.4" Dual Carbon Rail Slider and pairs it with an S8 Pro Video Head and a pair of Travel Flat AL Series 2 tripods with LBA2 Leveling Bases. The entire system packs inside an included rolling case for easy storage and transport.
The slider carriage features four bearings that allow it to glide across a pair of 22mm carbon fiber rails for smooth and quiet operation. Additionally, the slider is equipped with a weighted flywheel and rubber track belt drive that enables precise, hand-cranked motion control and smooth ramps in and out of your slides. A fixed 3/8"-16 screw on the carriage lets you attach the included S8 Pro Video Head, which can supports loads up to 17.6 pounds and features stepless pan/tilt drag and a 4-step (0 to 3) counterbalance system. The slider itself can support up to 26.5 pounds, allowing it to handle the weight of the head and attached camera.
A cheese plate on the underside of the rail provides multiple 1/4"-20 and 3/8"-16 threaded holes for easy center-mounting. For heavier loads, each end block features 3/8"-16 female adapters for mounting on the two included Travel Flat aluminum tripods. The tripods offer a maximum height of 44.75" without the LBA2 leveling bases and 46.75" with them. By removing the 3/8"-16 adapters, you can also mount the slider on a pair of C-stands or light stands that have 5/8" studs. For easy leveling, each tripod comes with a leveling base that can tilt +/-15° in any direction. The slider can also be used on the ground or on a table-top thanks to its all-terrain legs and articulating rubber feet.
Please see the links below for more information on the components of this kit.
Supporting loads up to 26.5 pounds, Benro's MoveOver12 35.4" Dual Carbon Rail Slider lets you add cinematic linear movement to your shots with DSLR rigs or large video cameras. The carriage features four bearings that allow it to glide across a pair of 22mm carbon fiber rails for smooth and quiet operation. Additionally, the slider is equipped with a weighted flywheel and rubber track belt drive that enables precise, hand-cranked motion control and smooth ramps in and out of your slides.
A fixed 3/8"-16 screw on the carriage is provided for attaching an optional flat base tripod head, while a cheese plate on the underside of the rail provides multiple 1/4"-20 and 3/8"-16 threaded holes for easy center-mounting. For supporting the slider on two tripods, each end block features a 3/8"-16 female adapter. By removing the adapters, the end blocks can be mounted on stands with 5/8" studs. For ground-level and table-top use, all-terrain legs and articulating feet let you easily adjust the level of your slider. To assist with leveling, a bubble level is integrated into the carriage. When it's time to pack up and go, the slider fits into an included carry case.
The Benro S8 Pro Video Head with Flat Base (3/8"-16 Connection) will attach directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. It can also be adapted to 75mm bowl type legs and hi-hats using an adapter, such as the Benro BL75, that is sold separately.
The S8 is a two-way, pan/tilt head designed for video applications, and will support cameras weighing up to 17.6 lb. Designed to give you better control, the head features stepless, continuous adjustment of both pan and tilt drag; this allows you to dial in the amount of tension you feel most comfortable with for a given shot. It can pan a full 360° as well as tilt forward (lens down) 90° and backward (lens up) 70°. To help compensate for cameras weighing different amounts, as well as adapt to payloads with varying centers of gravity, the head also features a four-step (0 - 3), adjustable counterbalance system.
The Benro LBA2 Leveling Base is ideal for creating stitched panoramic images that require a level base for your pan head or ball head. It has a load capacity of 110 lb and can tilt +/-15° in any direction. The top of the leveling base has a spring-loaded 3/8"-16 threaded stud that can be recessed to reveal a 1/4"-20 stud, allowing you to mount a head or a camera directly to the leveling base. The bottom mount is a 3/8"-16 female thread with a 1/4"-20 bushing adapter.
MoveOver12 35.4" DUAL CARBON RAIL SLIDER WITH FLYWHEEL
|MAXIMUM LOAD||26.5 lb (12 kg)|
|CARRIAGE TRAVEL||35.4" (90 cm)|
|ATTACHMENT SCREWW DIAMETER||3/8"-16|
|MOUNTING||Center Cheese Plate: 1/4"-20 and 3/8"-16 threads
End Blocks: 5/8" ports (3/8"-16 female adapters included)
|RAIL DIAMETER||0.87" (22 mm)|
|LENGTH||47.6" (121 cm)|
|WEIGHT||9.8 lb (4.5 kg)|
S8 PRO VIDEO HEAD WITH FLAT BASE (3/8"-16 Connection)
|LOAD CAPACITY||17.6 lb / 8 kg|
|HEAD TO TRIPOD MOUNTING THREAD||3/8"-16 thread|
|COUNTER BALANCE SYSTEM||Stepped: 0 - 3|
|QUICK RELEASE/WEDGE PLATE||QR13 plate with 1/4"-20 and 3/8"-16 screw|
|TILT RANGE||+90° to -70°|
|LEVELING BUBBLE/ILLUMINATED||Yes / Yes|
|TEMPERATURE RANGE||-4°F to 140°F / -20°C to 60°C|
|WEIGHT||5.7 lb / 2.6 kg|
2 x LBA2 LEVELING BASE
|LOAD CAPACITY||110 lb (50 kg)|
|TOP MOUNT THREAD SIZE||1/4"-20 and 3/8"-16|
|TRIPOD MOUNT THREAD SIZE||3.8"-16 with 1/4"-20 bushing adapter|
|HEIGHT||1.875" (4.8 cm)|
|WEIGHT||11.2 oz (318 g)|
California Customers: Proposition 65 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov