You have no items in your shopping cart.
Having wowed us with the introduction of the battery-powered TTL B1 and B2 flash heads, Profoto does it again with the AC-powered D2 500Ws AirTTL Monolight. Building on the foundation of the popular D1, this light maxes-out the D1 performance specs while adding wireless TTL from the B1 and B2. With the D2, "speed" is the operative word.
The D2 500 recycles to full power in 0.6 seconds, almost half the time as the D1 500, and in Freeze Mode, achieves flash durations as short as 1/63,000 of a second, outperforming most studio pack systems. That's good news for special effects photographers and sports shooters. It can also shoot bursts of 20 flashes per second, so you're sure to capture peak action or several versions of it. In addition, the D2 also supports High Speed Sync up to 1/8000 of a second for photographers who want to stop action or use wide apertures with full ambient light control. The 10-stop power range gives ample choices to achieve your objective.
Besides super-fast operation, the D2 shortens your shooting time with on-board TTL compatibility. Pros who formerly turned their noses up at the term "point-and-shoot" as amateurish will learn to love this technology. Simply set your lights up, set the camera to TTL and shoot. The first shot is nearly always a keeper. The key to this control is the optional Air Remote TTL-C (for Canon) or TTL-N (for Nikon). Operating on 2.4 GHz bandwidth, the wireless transmitter, really a controller, has 8 frequency channels and with 6 groups and a range of up to 330' for TTL triggering and 1000' for normal triggering. Each channel has power ratio capability of +/- 2 stops. If you prefer to use manual, you have 10 stops of power variation.
The D2 also features an enhanced, intuitive LCD screen display. Modeling Light, Ready Indicator, Mode, Sync, Channel, and Group are easily selected through the Settings button. The display even flips around the way your iPhone does in case you're working with the head upside down or hanging it overhead. The D2 has a self-seeking multi-voltage (100-240) power supply for worldwide use, too. Profoto has covered so many features on the photographers wish list that you'll wonder what they can come up with next.
|Maximum Watt/Seconds||500 Ws|
Power in 1 stop and 1/10 stop increments
Settings Button (Modeling Light, Ready Alert, Sync, Group A-F, Channels 1-8)
Test, On/Off Button
|Flash Variability||10 stops in 1/10 or 1 Stop increments
1-10 power level, 1.0-500 Ws
|Recycle Time||Minimum/Maximum: 0.03-0.6 sec
Quick Burst Mode: 20 frames per sec
|Flash Duration||(t0.5): 1/2600 sec in Normal mode max power - 1/63,000 sec. in Freeze mode min power|
|Beam Angle||77 degrees with built-in reflector and opal protective glass|
|Modeling Light||300 W halogen|
|Modeling Light Control||Off / Proportional / Free / Max|
|Wireless Remote||8 Channels / 6 Groups (A-F)
Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio)
Up to 1000' (300 m) for normal triggering
Up to 330' (100 m) for TTL with optional Air Remote TTL-C/N
|Frequency Band||2.4 GHz|
|Triggering||Air radio slaves, optical (IR), sync cord|
|Max Sync Speed||Up to 1/250 sec in Normal mode
Up to 1/8000 sec in High Speed mode
|Operating Voltage||100-240 VAC, 50/60 Hz, self-sensing|
|Flash Ready Indicator||Beep tone, ready right, modeling light dimming|
|User Replaceable Flashtube||Yes|
|Circuit Protection||Adaptive thermal control|
|Dimensions||12.2 x 5.1 x 7.1" (31 x 13 x 18 cm)|
|Weight||6.6 lb (3.0 kg)|
|Package Weight||12.95 lb|
|Box Dimensions (LxWxH)||17.8 x 10.3 x 6.7"|