Web Support (877) 977-6226
Contact us: Detroit | Chicago | Cincinnati

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Rode Stereo VideoMic Pro




  • Ideal for Video & DSLR Cameras

  • Integrated Shoemount/Shockmount

  • Level Switch: -10dB / 0dB / +20dB

  • High-Pass Filter Switch: 75Hz

  • Durable Multi-Strand Cable

  • 1/8" (3.5mm) Output Connector

  • 9V Battery Powered
  • Limited Stock - Order Soon

    You Pay: $299.00


    The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic's capsule feature a matched pair of 1/2" cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone's small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8" (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

    The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

    Broadcast recording quality on-camera microphone
    Matched pair 1/2" condenser capsules in XY stereo configuration
    Ultra lightweight, compact form factor
    Two step High Pass Filter (flat, 75Hz)
    Three position level control (-10dB, 0, +20dB)
    9V battery powered - over 100 hours use (alkaline)
    Integrated shock mounting
    Integrated foam windscreen
    3.5mm stereo mini-jack output
    Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
    TRANSDUCER Pressure Gradient, JFET impedance converter
    POLAR PATTERN XY Cardioid (Coincident)
    FREQUENCY RANGE 40Hz ~ 20,000Hz (selectable HPF@75Hz)
    MAXIMUM OUTPUT +4.2dBu (@ 1% THD into 1kΩ)
    POWER SUPPLY 9V alkaline battery
    CONNECTION 1/8" (3.5mm) stereo mini-jack
    SPL 134dB, max (1 kHz, 1% THD into 1kΩ)
    SENSITIVITY -38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz
    EIN 20dBA SPL (A - weighted per IEC651)
    DYNAMIC RANGE 100dB (per IEC651)
    SIGNAL TO NOISE RATIO 73dB SPL (A - weighted per IEC651)
    DIMENSIONS 2.6 x 4.25 x 5.1" (66 x 108 x 130 mm)
    WEIGHT 4.1 oz (117 g) (without battery)
  • Rode Stereo VideoMic Pro
  • Metal Camera Shoe Mount with 3/8" Thread
  • Windscreen
  • 10 Year Warranty

  • 0968813002276 210000023936