You have no items in your shopping cart.
This Benro A48TDS4 Series 4 Aluminum Monopod includes the 3-Leg Locking Base and S4 Video Head to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 72.3", the removable base provides three solid points of contact with the ground, and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.
The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by twist locks, and it folds down to 26.6" for transport in the included carrying case. The S4 is a compact video head with 360° rotation, fluid drag, and spring balance. There are separate pan and tilt lock levers, and a sliding quick-release plate helps to balance the camera.
The Benro S4 Video Head weighs only 1.5 pounds, is compact, and capable of supporting cameras weighing up to 8.8 pounds. The head has a fluid drag system and spring balance, with 360° panning rotation for smooth camera moves. There are separate pan and tilt lock levers for lock off shots. The sliding quick-release (QR) plate helps to balance the camera, and the head comes with a safety lock for the QR Plate. The S4 Video Head accepts 501PL compatible quick-release plates, making it easy to find spares or replacements.
The integrated bubble level aids in setting up level horizons. The adjustable Pan Handle can be mounted to either side of the S4 Video Head using the built in mounting rosettes. The S4 Video Head can be mounted to ball adapters, tripods and other camera supports via the 3/8" threaded female receiver on the magnesium alloy flat base.
Reap the benefits of a monopod with the stability of a tripod using the Benro A48TD Series 4 Aluminum Monopod with 3-Leg Locking Base. Able to hold up to 44.1 lb and extend to 68.3", the A48TD Series 4 is a versatile camera support thanks to its base which provides three solid points of contact with the ground. The base acts like a mini tripod, and its ball joint allows you to smoothly pan and tilt your camera. If using a pan head on the monopod, the base's ball joint can be locked so that you can pan with the head independently, or you can replace the base with the included rubber foot. The four leg sections are secured by twist locks, and it folds down to 22.6" for transport.
Add stability to your monopod with the Benro 3-Leg Locking Base. It attaches to any monopod with a 3/8"-16 female thread on its foot. The base allows for smooth pan and tilt movements due to a ball joint that can be locked with a wingnut-style locking knob.
S4 VIDEO HEAD
|LOAD CAPACITY||Maximum load 8.8 lb (4 kg)|
|DIAMETER/THREAD||60 mm flat base
with 3/8" threaded female receiver
|COUNTER BALANCE SYSTEM||Spring cartridge|
|COUNTER BALANCE RANGE||Not specified by manufacturer|
|CENTER OF GRAVITY||Not specified by manufacturer|
|QUICK RELEASE/WEDGE PLATE||Yes|
|BALANCE PLATE||Sliding, 1/4" and 3/8" screws
QR6 (501PL Compatible)
|TILT DRAG||Fixed fluid drag|
|TILT RANGE||-75 to +90|
|TILT LOCK||Separate lock lever|
|PAN DRAG||Fixed fluid drag|
|PAN LOCK||Separate lock lever|
|TEMPERATURE RANGE||-4 to 140°F (-20 to 60°C)|
|HEIGHT||3.9" (100 mm)|
|WEIGHT||1.5 lb / 0.7 kg|
A48TD SERIES 4 ALUMINUM MONOPOD WITH 3-LEG LOCKING BASE
|LOAD CAPACITY||44.1 lb (20 kg)|
|MAXIMUM HEIGHT||68.3" (173.5 cm)|
|CLOSED LENGTH||22.6" (57.5 cm)|
|LEG LOCK TYPE||Twist|
|THREAD SIZE||Foot: 3/8"-16
Head Mount: 3/8"-16 and 1/4"-20
|WEIGHT||2.3 lb (1.0 kg)|
3-LEG LOCKING BASE FOR MONOPODS
|MAXIMUM HEIGHT||2.4" (6.1 cm)|
|FOLDED LENGTH||5.5" (14 cm)|
|THREAD SIZE||Male, 3/8"-16|
|WEIGHT||12.8 oz (363 g)|
California Customers: Proposition 65 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov