Web Support (877) 977-6226
Contact us: Chicago|Cincinnati|Detroit

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Benro BV8 Twin Leg Aluminum Tripod Kit

Benro Model # BV8



  • 17.6 lb / 8 kg Load Capacity

  • 75mm Head

  • Flat Base by Removing Tie-Down Stud

  • 5-Step Counterbalance

  • Independent 4-Step Pan & Tilt Drag

  • Manfrotto 501/504PL Type Sliding Plate

  • 2-Stage Twin Leg Aluminum Tripod

  • 28 to 63" Height Range

  • Spiked Feet & Removable Rubber Foot Pads

  • Includes SuperUser Group Membership
  • Out of stock online

    You Pay: $599.00
    No credit? Lease with Zibby and pay monthly.
    Get pre-approved


    The Benro BV8 Twin-Leg Aluminum Tripod Kit is a complete tripod system ideal for studio applications and handling larger camera rigs weighing up to 17.6 pounds. The kit pairs the 75mm-ball BV8 video head with a twin-leg aluminum tripod. The BV8 head features a 5-step counterbalance system to dial in the correct amount for your setup, and independent 4-step pan and tilt drag settings for precise control over camera movements. A Manfrotto 501/504PL compatible sliding quick release plate is provided. All the main controls aside from counterbalance are located on the left side of the head, making it easy to make adjustments with a single hand while operating the camera. For added versatility, the 75mm ball tie-down stud is removable to convert the head to a flat base for use on a slider or other support device.

    The 2-stage, 3-section twin-leg aluminum tripod incorporates a 75mm bowl and offers sturdy support for the BV8 head. It features oversized quick positive leg locks for simple and fast setup, an adjustable/removable mid-level spreader, and dual spiked feet with removable rubber pads. The tripod system extends to a maximum height of 63", while getting as low as 28". A carry case and shoulder strap are included.

    • Supports up to 17.6 lb
    • Removable tie-down stud to convert to flat base head
    • 5-step (0 to 4) counterbalance
    • Independent 4-step (0 to 3) pan and tilt drag
    • -70° to +90° tilt range
    • Manfrotto 501/504PL compatible sliding plate
    • Two 3/8"-16 accessory threads for mounting accessories, such as a monitor or recorder
    • Bubble level
    • Twin-leg aluminum tripod with 100mm bowl fitting
    • 28 to 63" height range (with head attached)
    • Oversized twist-lever leg locks
    • Adjustable/removable mid-level spreader
    • Dual spiked feet with removable rubber pads
    Load Capacity 17.6 lb / 8 kg
    Head Mount 75 mm bowl
    Counterbalance 5-step (0 to 4)
    Pan Drag 4-step (0 to 3) fluid cartridge
    Tilt Drag 4-step (0 to 3) fluid cartridge
    Panning Range 360°
    Tilt Range -70° to +90°
    Quick Release Plate QR13 (Manfrotto 501/504PL compatible)
    1/4"-20 and 3/8"-16 cameras screws
    Accessory Mounting Threads 2 x 3/8"-16
    Material Aluminum
    Stages 2
    Sections 3
    Minimum Height 28" / 71.1 cm
    Maximum Height 63" / 160 cm, at 24° leg angle with column extended
    Folded Length 34.1" / 86.7 cm
    Weight 14 lb / 6.3 kg
    Packaging Info
    Package Weight 20.2 lb
    Box Dimensions (LxWxH) 38.78 x 9.58 x 9.38"
  • Benro BV8 Twin Leg Aluminum Tripod Kit
  • QR13 Quick Release Plate
  • BS02 Pan Bar Handle
  • ML08 Mid-Level Spreader for H-Series Twin Leg Tripods
  • 3 x SP02 Rubber Pivot Foot for H-Series Twin Leg Tripods
  • Carry Case
  • Strap
  • Limited 3-Year Warranty, Extendable to 5 Years with Registration

  • California Customers: Proposition 65 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

    6931747352500 210000032962