PROCAM Photo & Video GearPROCAM Photo & Video GearPROCAM Photo & Video Gear

Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone

Model # VMICD3Pro

$199.00

In StockIn StockOut of stock
FEATURES

  • Mobile Journalist, Vlogger, Run & Gun
  • For Cameras and Mobile Devices
  • Internal 51-Hour Rechargeable Battery
  • Stepless Gain Knob, Bass Roll-Off Switch
  • Auto-Configuring 3.5mm TRRS Output
  • Power Switch with LED & Auto On/Off
  • Low Noise & Distortion, High SNR
  • Lightweight Body, Low-Reflection Finish
  • Detachable Shoe/Pole/Tripod Shockmount
  • Includes Cables, Windscreen & Pouch


  • CURRENTLY OUT OF STOCK

    Designed to provide a noteworthy improvement in sound quality over microphones built into cameras, smartphones, and portable recorders, the Deity Microphones V-Mic D3 Pro is a camera-mount shotgun microphone offering directional audio capture, adjustable gain and filtering, and broad device compatibility for for mobile journalists, vloggers, YouTubers, and run-and-gun videographers.

    With a built-in microprocessor that automatically configures its TRRS connector to work with most 3.5mm mic input jacks, the V-Mic D3 Pro is compatible with a variety of DSLRs, camcorders, mobile devices, and portable audio recorders. Attachment to your camera, boompole, or tripod is simple and efficient using the supplied Rycote adjustable shockmount and 3.5mm TRRS coiled cable.

    A stepless knob on the mic's bottom provides up to 20 dB of gain for easy optimization of levels. Activate the onboard low-cut filter at 75 Hz or 150 Hz to reduce rumble and bass buildup. The microphone is powered primarily by the internal 51-hour rechargeable battery; plug-in power (bias voltage) from your camera or mixer is only required to turn on/off the mic. The lightweight aluminum body is finished in a low-reflection paint, ensuring that it won't weigh down your camera or induce distracting glare.


    You Should Know


    Some TRS-equipped cameras from Blackmagic, Fuji, and Olympus require a 3.5mm TRS cable (available separately) for operational compatibility. Plug-in power (bias voltage) is required to turn on the V-Mic D3 Pro.


    Auto-Configuring 3.5mm Connector


    The V-Mic D3 Pro incorporates a microprocessor that automatically adapts its 3.5mm TRRS connector to work with most 3.5mm microphone jacks. Out of the box, the V-Mic D3 Pro is compatible with many DSLRs, camcorders, smartphones and tablets (late-model iOS devices require Apple's Lightning to 3.5mm headphone jack adapter), portable audio recorders, bodypack transmitters, and laptops. Visit the Deity Microphones website to see a comprehensive list of compatible devices.


    Stepless Gain Knob


    The V-Mic D3 Pro features a stepless analog gain dial. Integrated bump guards help prevent the dial from being accidentally rotated. The gain (up to 20 dB) is added on a linear scale, so you can dial in the exact amount of boost you need for the shot.


    Selectable Low-Cut Filtering


    Attenuate low-frequency rumble with the V-Mic D3 Pro's low-cut filter, selectable at 75 Hz or 150 Hz. Rather than using a sunken switch that requires a pointed object to flip, the V-Mic D3 Pro opts for a single top-mounted button.


    Low Off-Axis Coloration


    The V-Mic D3 Pro's pickup pattern remains similar across essential frequencies, yielding low off-axis coloration. Novice and experienced videographers can capture consistent audio quality when dealing with sources that vary their positions.


    Low-Noise Electronics


    Thanks to the 14mm condenser capsule and low-noise, low-distortion electronics, the V-Mic D3 Pro provides clean audio with a high signal-to-noise ratio, which means less time spent in post-production processing your tracks with noise-reduction software.


    Long Battery Life


    The V-Mic D3 Pro uses a built-in 320mAh lithium battery, which powers the mic for up to 51 hours. Plug-in power is only used to wake the mic from its standby mode. The internal battery recharges via USB in approximately two hours.

    Automatic power saving conserves battery life by entering standby mode when your camera or device is turned off. The power switch and power LED indicate aid in power management; the LED will be red when power is low.


    Convenient Accessories


    The Rycote Lyre shockmount supports attachment to a camera shoe mount, boompole, or tripod, and it minimizes the transfer of vibrations by decoupling the mic from your camera or stand. The included foam windscreen reduces noise from HVAC systems and light wind. For enhanced protection against wind noise in outdoor shoots, use a windjammer such as the Rycote 12cm Classic-Softie windshield (available separately). Store and transport the entire bundle in the included semi-rigid nylon carrying pouch.

    6971842180004

    Specifications

    Microphone
    Form Factor Stand/Boom Mount
    Sound Field Mono
    Operating Principle Pressure Gradient
    Capsule Condenser
    Diaphragm 0.55" / 14 mm
    Polar Pattern Supercardioid
    Orientation End Address
    Circuitry Solid-State
    Pad None
    High-Pass Filter 75 Hz
    150 Hz
    Tone Adjustment None
    Gain Adjustment Up to +20 dB
    Indicators Single LED (Status, Power)
    On-Board Controls Gain, High-Pass Filter, On/Off
    Windscreen Foam (Included)
    Performance
    Frequency Range 50 Hz to 20 kHz
    Maximum SPL 130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
    Off-Axis Rejection 3 dB at 60°
    10 dB at 120°
    15 dB at 180°
    Impedance 200 Ohms
    Sensitivity -24 dBV/Pa at 1 kHz
    Dynamic Range 114 dB
    Signal-to-Noise Ratio 84 dB
    THD < 0.1%
    Connectivity
    Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRRS
    Number of Conductors 3
    Wireless Connectivity None
    Power
    Operating Voltage Not Specified by Manufacturer
    Operating Current Consumption 6.3 mA (Battery Power)
    Battery Type 1 x Built-In
    Battery Chemistry Lithium-Ion
    Battery Capacity 320 mAh
    Approximate Battery Life 51 Hours
    Physical
    Color Black
    Mounting 1/4"-20 Female, 3/8"-16 Female, Camera-Mount, Shockmount (with Included Hardware)
    Construction Material Aluminum
    Storage Temperature 14 to 102°F / -10 to 70°C
    Certifications CE, RoHS, as per Manufacturer
    Dimensions ø: 0.83 x L: 7.44" / ø: 21 x L: 189 mm
    Weight 2.75 oz / 78 g (Microphone)
    5.04 oz / 143 g (with Mount)

    What's in the box

  • Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone
  • Rycote Lyre Adjustable Shoe Shockmount
  • Smart 3.5mm TRRS Coiled Cable
  • USB Charging Cable
  • Foam Windscreen
  • Semi-Rigid Nylon Carrying Pouch
  • Limited 2-Year Warranty with 6-Month Extension upon Online Registration
  • Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Browse WishlistRemove Wishlist
    Shopping cart

    Your cart is empty.

    Return To Shop

    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page