You have no items in your shopping cart.
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
|Polar Pattern||XY Cardioid|
|Frequency Range||40 Hz to 20 kHz (selectable HPF @ 75 Hz)|
|Sensitivity||-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz|
|Output Impedance||200 Ohms|
|Maximum Output||+4.2 dBu (@ 1% THD into 1 kOhms)|
|Dynamic Range||100 dB|
|Maximum SPL||134 dB, max (1 kHz, 1% THD into 1 kOhms load)|
|Signal / Noise||76 dBA (A-weighted per IED651)|
|Power Supply||9 V alkaline battery|
|Connection||1/8" (3.5 mm) stereo mini-jack|
|Signal to Noise Ratio||76 dBA SPL (A-weighted per IEC651)|
|Dimensions (D x W x H)||4.5 x 3.1 x 5.3" (115 x 80 x 134 mm)|
|Weight||0.26 lb (116 g) (without battery)|
|Package Weight||0.6 lb|
|Box Dimensions (LxWxH)||8.5 x 5.1 x 3.2"|
California Customers: Proposition 65 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov