Sony FA-WRR1 Wireless Radio Receiver

Expand your wireless flash and camera setup with this FA-WRR1 Wireless Radio Receiver from Sony. Featuring a Multi Interface Shoe on the top, this receiver will directly support most Sony-compatible flash units and will even work in manual mode with flashes that use the Auto-lock Accessory Terminal along with an adapter. For full functionality a flash with the Multi Interface Shoe is required, enabling TTL and High-Speed Sync support as well as all remote control functions via the FA-WRC1M Wireless Radio Controller or a compatible radio-equipped commander flash. In order to ensure reliable performance, the system uses a 2.4 GHz radio signal with a range of up to 98.4'. Also, it can operate on one of 14 channels and with up to 5 groups.

In addition to a flash connection, the receiver offers a standard PC sync terminal for connecting to alternative strobes and lights. There is also a Multi Terminal connection for remote triggering of select cameras with the use of the separately available VMC-MM1 Multi Terminal. For mounting the flash setup to a stand, the receiver features a cold foot on the base with a 1/4"-20 thread. Additionally, it is dust and moisture resistant for operating in less-than-ideal environments.

Compatible Flashes

• HVL-F32M
• HVL-F43M
• HVL-F60M
• HVL-F42AM (manual only, requires ADP-MAA Shoe Adapter)
• HVL-F43AM (manual only, requires ADP-MAA Shoe Adapter)
• HVL-F58AM (manual only, requires ADP-MAA Shoe Adapter)

Compatible Cameras

• a7 II
• a7R II
• a7S II
• a99 II
• a6500

Features

• 2.4 GHz radio system has an effective range of 98.4' and can operate without direct line of sight
• Works directly with Sony flashes equipped with Multi Interface Shoe, including HVL-F60M, HVL-F43M, and HVL-F32M
• Sony flashes using the older Auto-lock Accessory Terminal can work in manual mode only with the use of a separately available adapter
• Fourteen channels and up to five groups are available
• TTL and High-Speed Sync at up to 1/8000 second are supported
• Manual triggering of flashes is possible
• PC sync terminal for connecting strobes and monolights
• Multi Terminal connector for using separately available VMC-MM1 Multi Terminal Cable to trigger select cameras
• Cold foot on base with 1/4"-20 mounting thread
• Dust and moisture-resistant construction for operating in less-than-ideal environments